| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| ADAQ |
BODY LENGTH |
1.375 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.125 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, STEPPED |
| TEST |
TEST DATA DOCUMENT |
37695-228023 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
2 |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY FINISH AND 1.8 7TH SECONDARY PATTERN |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEFD |
ACTUATOR TYPE |
DUAL CONCENTRIC |
| ABJT |
TERMINAL LENGTH |
0.289 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
1.297 NOMINAL CENTIMETERS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.5 PERCENT, RATED AMPERES C AND BETTER FINISH AND 5.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AEFK |
MAXIMUM STARTING TORQUE |
17.00 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 1ST SECTION AND -10.0/+10.0 2ND SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ADAV |
OVERALL DIAMETER |
1.586 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AGQL |
UNDERCUT LENGTH |
0.640 NOMINAL INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
1.281 INCHES NOMINAL |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CW |
| ABHP |
OVERALL LENGTH |
2.656 INCHES MAXIMUM |
| AEDQ |
UNDERCUT DIAMETER |
0.125 NOMINAL INCHES |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |