| AEFK |
MAXIMUM STARTING TORQUE |
0.70 INCH-OUNCES |
| ABPA |
UNDERCUT DIAMETER |
1.312 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND |
| ADAV |
OVERALL DIAMETER |
2.047 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AAPN |
SECTION QUANTITY |
2 |
| AEDA |
MOUNTING LIP DEPTH |
0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.500 INCHES NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AAVL |
PILOT DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.119 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 1ST SECTION |
| ABPM |
BODY DIAMETER |
1.453 INCHES NOMINAL |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.042 |
| ABHP |
OVERALL LENGTH |
2.156 INCHES MINIMUM AND 2.188 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AECZ |
MOUNTING LIP DIAMETER |
1.4370 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
15.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.70 INCH-OUNCES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 ALL SECTIONS |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 2ND SECTION |