| ABPM |
BODY DIAMETER |
1.747 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.187 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ADAQ |
BODY LENGTH |
1.044 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| ADAV |
OVERALL DIAMETER |
1.919 INCHES MINIMUM AND 1.922 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.30 INCH-OUNCES |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEFK |
MAXIMUM STARTING TORQUE |
0.30 INCH-OUNCES |
| ABPA |
UNDERCUT DIAMETER |
1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 KILOHMS SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
353.0 MINIMUM AND 358.0 MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AAVM |
PILOT LENGTH |
0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AAVL |
PILOT DIAMETER |
1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.0 FREE AIR SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ABHP |
OVERALL LENGTH |
1.853 INCHES MINIMUM AND 1.921 INCHES MAXIMUM |
| AECZ |
MOUNTING LIP DIAMETER |
1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.172 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0900 INCHES MINIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.30/+0.30 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.843 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |