| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
340.0 NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.30 INCH-OUNCES |
| AEFK |
MAXIMUM STARTING TORQUE |
0.30 INCH-OUNCES |
| ABPA |
UNDERCUT DIAMETER |
0.781 INCHES MAXIMUM |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-2.0/+2.0 OHMS SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABHP |
OVERALL LENGTH |
1.255 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 KILOHMS SINGLE SECTION |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
160.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.7 FREE AIR SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| APXH |
TERMINAL LOCATION |
REAR END |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-400.0/+400.0 SINGLE SECTION |
| ADAV |
OVERALL DIAMETER |
0.875 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.560 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
0.570 INCHES NOMINAL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
500.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 SOLDER STUD |
| AAVL |
PILOT DIAMETER |
0.7500 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |