| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 KILOHMS SINGLE SECTION |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
0.120 |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| FEAT |
SPECIAL FEATURES |
CONSISTS OF RESISTOR-1,P/N 8445009; ADAPTER-1,P/N 11011253; SETSCREW-2,P/N MS51053-101; SCREW-3,P/N MS35275-212; WASHER-3,P/N MS15795-804; COUPLING-1,P/N 11011288 |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
0.6250 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| ABXF |
SHAFT LENGTH |
0.275 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
1.1090 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| ABPA |
UNDERCUT DIAMETER |
1.0300 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
1.1090 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
230.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| ADAQ |
BODY LENGTH |
0.6350 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
1.0300 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
40.0 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
500.0 SINGLE SECTION |
| AAVM |
PILOT LENGTH |
0.0450 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
0.910 INCHES NOMINAL |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
30.0 |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AJYN |
SCREW THREAD DIAMETER |
0.112 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |