| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.20/+0.20 ALL SECTIONS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.970 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-300.0/+300.0 ALL SECTIONS |
| ABPC |
UNDERCUT WIDTH |
0.0600 INCHES NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.0006 INCHES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
3 |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
4.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAQ |
BODY LENGTH |
1.700 INCHES MAXIMUM |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 ALL SECTIONS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
4.0 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR ALL SECTIONS |
| AEFY |
SHAFT END PLAY |
0.002 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ADAV |
OVERALL DIAMETER |
1.156 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AEGA |
LATERAL RUNOUT |
0.001 INCHES |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABWV |
SHAFT DIAMETER |
0.1195 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.138 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABPM |
BODY DIAMETER |
1.156 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
400.0 ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
12 SOLDER STUD |
| AEDA |
MOUNTING LIP DEPTH |
0.0600 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |