| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEDX |
SHAFT STYLE |
ROUND |
| ABPM |
BODY DIAMETER |
1.450 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
9 OCLOCK SINGLE PRIMARY |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
DOUBLE ENDED SHAFT |
| AECZ |
MOUNTING LIP DIAMETER |
1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
3 |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 3RD SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
20.0 ALL SECTIONS |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
1000.0 1ST SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.50 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 PERCENT, RATED AMPERES C AND BETTER SELECT |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| ADAQ |
BODY LENGTH |
2.200 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
8 OCLOCK ALL PRIMARIES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.2 FREE AIR ALL SECTIONS |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
14 TURRET |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
10000.0 3RD SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-10.0/+10.0 OHMS 1ST SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
360.0 NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-10.0/+10.0 OHMS 3RD SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
10 OCLOCK ALL PRIMARIES |
| AAVL |
PILOT DIAMETER |
1.0000 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
1.187 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.2436 INCHES MINIMUM AND 0.2439 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |