| AAPN |
SECTION QUANTITY |
1 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.25 FREE AIR SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 305.0 MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
C SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CBME |
CUBIC MEASURE |
0.155 CUBIC INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-20.0/+20.0 SINGLE SECTION |
| ABNB |
FIRST FLAT LENGTH |
0.540 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ABNC |
FLAT HEIGHT |
0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
82577-3032911 DRAWING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFM |
MAXIMUM STOP TORQUE |
80.00 INCH-OUNCES |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEFP |
NONTURN DEVICE RADIUS |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-3.0/+0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 25 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 120 DEG CELSIUS SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| ABXF |
SHAFT LENGTH |
0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED, FLATTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.5 KILOHMS SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
295.0 MINIMUM AND 305.0 MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 3 OCLOCK AND AT 9 OCLOCK |