| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 7TH SECONDARY QUALITY |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| ABJT |
TERMINAL LENGTH |
0.185 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| ADAQ |
BODY LENGTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.0 OHMS C AND BETTER FLOORING |
| ADAT |
BODY WIDTH |
0.280 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AXGY |
MOUNTING METHOD |
TERMINAL |
| ABWV |
SHAFT DIAMETER |
0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
5400.0 NOMINAL |
| AAQL |
BODY STYLE |
RECTANGULAR |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABMK |
OVERALL WIDTH |
0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.520 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
5400.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 SINGLE SECTION |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.200 INCHES NOMINAL |