| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| AGQL |
UNDERCUT LENGTH |
0.430 INCHES NOMINAL |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
C ALL SECTIONS |
| ABPM |
BODY DIAMETER |
1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, STEPPED |
| CBBL |
FEATURES PROVIDED |
PANEL SEAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEFD |
ACTUATOR TYPE |
DUAL CONCENTRIC |
| AEFP |
NONTURN DEVICE RADIUS |
0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
1.290 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| ADAP |
MOUNTING BUSHING LENGTH |
0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ADAQ |
BODY LENGTH |
1.282 INCHES MINIMUM AND 1.344 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEFL |
MAXIMUM RUNNING TORQUE |
6.00 INCH-OUNCES |
| ABWV |
SHAFT DIAMETER |
0.245 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AEDQ |
UNDERCUT DIAMETER |
0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |