| AAPN |
SECTION QUANTITY |
1 |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
2 SLOTS AND ONE UNTHREADED HOLE IN CENTER |
| ADAU |
BODY HEIGHT |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
9000.0 NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.000 OHMS SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
08241-GVL20404 DRAWING |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| ABTD |
MOUNTING SLOT WIDTH |
0.074 INCHES MINIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.074 INCHES MINIMUM |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.414 INCHES MINIMUM AND 0.424 INCHES MAXIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| ABMK |
OVERALL WIDTH |
0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABJT |
TERMINAL LENGTH |
0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| ABHP |
OVERALL LENGTH |
0.390 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
LEFT ADJACENT SIDE FROM ADJUSTMENT CONTROL |
| ADAT |
BODY WIDTH |
0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |