| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ABXF |
SHAFT LENGTH |
0.250 INCHES MAXIMUM |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.625 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
1.8750 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
2.250 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION TABLE |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
3.125 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 KILOHMS SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2500.0 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES MAXIMUM |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-2.00/+2.00 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ADAQ |
BODY LENGTH |
2.250 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.5 |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 FREE AIR SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
50237-695-2-40015 DRAWING |
| ADAV |
OVERALL DIAMETER |
2.750 INCHES MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ZERO BASED LINEARITY |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |