| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 7TH SECONDARY QUALITY |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION |
| ADAQ |
BODY LENGTH |
0.490 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.095 NOMINAL MILS AND 0.105 NOMINAL CENTIMETERS |
| AAPN |
SECTION QUANTITY |
1 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
7200.0 MINIMUM AND 15120.0 MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.045 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABJT |
TERMINAL LENGTH |
0.172 INCHES MINIMUM |
| AEFL |
MAXIMUM RUNNING TORQUE |
5.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CBME |
CUBIC MEASURE |
0.063 CUBIC INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| ABTB |
MOUNTING HOLE DIAMETER |
0.068 NOMINAL MILS AND 0.078 NOMINAL CENTIMETERS |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |