| AAPN |
SECTION QUANTITY |
1 |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
75.0 SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
15786-97676 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CBME |
CUBIC MEASURE |
0.038 CUBIC INCHES |
| ABTD |
MOUNTING SLOT WIDTH |
0.060 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.390 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.100 NOMINAL INCHES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
7200.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
5.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.200 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| ABJT |
TERMINAL LENGTH |
0.300 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 7TH SECONDARY QUALITY |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ADAQ |
BODY LENGTH |
0.390 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
SLOT |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.250 INCHES MAXIMUM |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.419 INCHES NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
7200.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.100 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| ABXF |
SHAFT LENGTH |
0.040 INCHES NOMINAL |