| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.700 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| ABHP |
OVERALL LENGTH |
1.312 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 KILOHMS SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
8280.0 MINIMUM AND 9720.0 MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ZZZY |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.062 INCHES NOMINAL |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY NAVORD OD41152 |
| ADAU |
BODY HEIGHT |
0.312 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.300 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.812 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ADAT |
BODY WIDTH |
0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
8280.0 MINIMUM AND 9720.0 MAXIMUM |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.088 INCHES MINIMUM |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES NOMINAL |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |