| ABXF |
SHAFT LENGTH |
0.562 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
0.80 INCH-OUNCES |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TURRET |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
1.935 INCHES MAXIMUM |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-2.0/+2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
352.0 NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
200.0 OHMS SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEGB |
PILOT DIAMETER RUNOUT |
0.0015 INCHES |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AECZ |
MOUNTING LIP DIAMETER |
1.9350 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
1.438 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-400.0/+400.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
176.0 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| AAVL |
PILOT DIAMETER |
1.3130 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CBBL |
FEATURES PROVIDED |
HUMIDITY PROOF |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
1.0 |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| AEFY |
SHAFT END PLAY |
0.004 INCHES |
| ADAQ |
BODY LENGTH |
0.800 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.80 INCH-OUNCES |