| AAPN |
SECTION QUANTITY |
1 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABMK |
OVERALL WIDTH |
0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.000 OHMS SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABJT |
TERMINAL LENGTH |
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.300 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABXF |
SHAFT LENGTH |
0.078 INCHES MAXIMUM |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
110.0 SINGLE SECTION |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ADAT |
BODY WIDTH |
0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 FREE AIR SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
50.0 SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |
| ABHP |
OVERALL LENGTH |
1.328 INCHES NOMINAL |