| ABXF |
SHAFT LENGTH |
0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| ABWV |
SHAFT DIAMETER |
0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
0.637 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.100 INCHES NOMINAL |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.100 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| APXH |
TERMINAL LOCATION |
REAR END |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
175.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABJT |
TERMINAL LENGTH |
0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFK |
MAXIMUM STARTING TORQUE |
5.00 INCH-OUNCES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.076 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
50.0 SINGLE SECTION |
| ABMK |
OVERALL WIDTH |
0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |
| ADAT |
BODY WIDTH |
0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |