| ABHP |
OVERALL LENGTH |
1.766 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 KILOHMS SINGLE SECTION |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| ADAV |
OVERALL DIAMETER |
1.343 INCHES NOMINAL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
333.0 SINGLE SECTION AND 666.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
1.00 INCH-OUNCES |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.00700 INCHES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
352.0 NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEFP |
NONTURN DEVICE RADIUS |
0.562 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SOLDER STUD |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGC |
SHAFT RADIAL PLAY |
0.004 INCHES |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00250 INCHES |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 FREE AIR SINGLE SECTION |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.734 INCHES NOMINAL |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| ABPM |
BODY DIAMETER |
1.312 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-5.0/+5.0 OHMS ALL SECTIONS |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
2 SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |