| AEDX |
SHAFT STYLE |
ROUND |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| ADAQ |
BODY LENGTH |
1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
2 |
| AJYN |
SCREW THREAD DIAMETER |
0.164 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| ABPA |
UNDERCUT DIAMETER |
0.187 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
356.0 NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABHP |
OVERALL LENGTH |
2.160 INCHES MINIMUM AND 2.240 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 TAB, SOLDER LUG |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.15/+0.15 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.0 FREE AIR ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
1.250 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
2.422 INCHES MINIMUM AND 2.558 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
120.0 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 KILOHMS ALL SECTIONS |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES MINIMUM |
| ABXF |
SHAFT LENGTH |
0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |