| AEDA |
MOUNTING LIP DEPTH |
0.6100 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TURRET |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AEFD |
ACTUATOR TYPE |
DOUBLE ENDED SHAFT |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.910 INCHES MAXIMUM |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 KILOHMS SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ABSOLUTE LINEARITY |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.002 INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.002 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABPC |
UNDERCUT WIDTH |
0.0550 INCHES MINIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
1000.0 SINGLE SECTION |
| AAVM |
PILOT LENGTH |
0.0510 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
110.0 NOMINAL |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.05 |
| ABPM |
BODY DIAMETER |
2.000 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-400.0/+400.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.66 INCH-OUNCES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.05/+0.05 SINGLE SECTION |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| AAVL |
PILOT DIAMETER |
1.87475 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
0.66 INCH-OUNCES |