| AXGY |
MOUNTING METHOD |
FLANGE |
| AEDX |
SHAFT STYLE |
ROUND |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 7TH SECONDARY FINISH |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.742 INCHES MAXIMUM |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 KILOHMS ALL SECTIONS |
| AECZ |
MOUNTING LIP DIAMETER |
1.8120 INCHES MAXIMUM |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.35 INCH-OUNCES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 ALL SECTIONS |
| ABPC |
UNDERCUT WIDTH |
0.0930 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
228.0 NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| ABPM |
BODY DIAMETER |
1.656 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 TURRET |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 7TH SECONDARY PATTERN |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
113.7 ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES NOMINAL |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.1 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFK |
MAXIMUM STARTING TORQUE |
1.80 INCH-OUNCES |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEGA |
LATERAL RUNOUT |
0.0015 INCHES |
| ABPA |
UNDERCUT DIAMETER |
1.500 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 ALL SECTIONS |
| AAVL |
PILOT DIAMETER |
1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS ABSOLUTE LINEARITY |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-0.5/+0.5 DEG ANGULAR ROTATION ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| AEDA |
MOUNTING LIP DEPTH |
0.0730 INCHES MINIMUM |