| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3602.0 NOMINAL AND 3606.0 MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
1800.0 2ND SECTION |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.030 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
0.90 INCH-OUNCES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AEFM |
MAXIMUM STOP TORQUE |
100.00 INCH-OUNCES |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| ADAQ |
BODY LENGTH |
1.500 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.075/+0.075 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.500 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
3 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+0.1 OHMS 2ND SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 KILOHMS SINGLE SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-0.25/+0.25 OHMS 1ST SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.002 INCHES |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
3255.7 3RD SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AECZ |
MOUNTING LIP DIAMETER |
0.8750 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-0.25/+0.25 OHMS 3RD SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.60 INCH-OUNCES |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
344.3 1ST SECTION |
| TEST |
TEST DATA DOCUMENT |
18876-10243513 DRAWING |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAV |
OVERALL DIAMETER |
1.070 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| FEAT |
SPECIAL FEATURES |
REAR 0.62 IN. BY 0.62 IN. SLOTTED SHAFT FLUSH WITH CASE |
| AAVL |
PILOT DIAMETER |
0.7500 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| ABWV |
SHAFT DIAMETER |
0.1248 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ABPA |
UNDERCUT DIAMETER |
0.750 INCHES NOMINAL |