| AEDX |
SHAFT STYLE |
ROUND |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFY |
SHAFT END PLAY |
0.00600 INCHES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AAPN |
SECTION QUANTITY |
2 |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-20.0/+20.0 ALL SECTIONS |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.10 INCH-OUNCES |
| ADAQ |
BODY LENGTH |
1.405 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
356.0 NOMINAL |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.5 FREE AIR ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.000 KILOHMS ALL SECTIONS |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.004 INCHES |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 SOLDER STUD |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2500.0 ALL SECTIONS |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| AEFZ |
SHAFT RUNOUT |
0.005 INCHES |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS ALL SECTIONS |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| AEGA |
LATERAL RUNOUT |
0.004 INCHES |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |