| ABXF |
SHAFT LENGTH |
0.081 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.50 FREE AIR SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.081 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 WIRE LEAD |
| ADAQ |
BODY LENGTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
11.484 INCHES MINIMUM AND 11.516 INCHES MAXIMUM |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CCW |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
9000.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ABHP |
OVERALL LENGTH |
1.315 INCHES MINIMUM AND 1.357 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |