| ABPA |
UNDERCUT DIAMETER |
1.625 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
2.500 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
6 OCLOCK 12TH PRIMARY |
| ABPM |
BODY DIAMETER |
1.781 NOMINAL CENTIMETERS |
| AAVL |
PILOT DIAMETER |
1.5620 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AAPN |
SECTION QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
DOUBLE ENDED SHAFT |
| AEFK |
MAXIMUM STARTING TORQUE |
1.10 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 PERCENT, RATED AMPERES C AND BETTER |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.25/+0.25 ALL SECTIONS |
| AECZ |
MOUNTING LIP DIAMETER |
1.7500 INCHES NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| ABHP |
OVERALL LENGTH |
2.213 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-150.0/+150.0 ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
357.0 MINIMUM |
| TEST |
TEST DATA DOCUMENT |
10001-2552951 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| ABXF |
SHAFT LENGTH |
0.563 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.00250 INCHES |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 NOMINAL INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ADAQ |
BODY LENGTH |
1.650 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY AT 10'30 OCLOCK |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.70 INCH-OUNCES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TURRET |
| AEGA |
LATERAL RUNOUT |
0.003 INCHES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| FEAT |
SPECIAL FEATURES |
REAR SHAFT IS 0.125 INCHES LONG MAXIMUM BY 0.250 INCHES NOMINAL IN DIAMETER |