| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| AAVL |
PILOT DIAMETER |
0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.00 INCH-OUNCES |
| AEFK |
MAXIMUM STARTING TORQUE |
1.00 INCH-OUNCES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.000 KILOHMS SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| ABXF |
SHAFT LENGTH |
0.771 INCHES MINIMUM AND 0.779 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
DOUBLE ENDED SHAFT |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
340.0 NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.5/+1.5 DEG ANGULAR ROTATION SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-40.0/+40.0 SINGLE SECTION |
| AECZ |
MOUNTING LIP DIAMETER |
1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
50000.0 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.785 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
1.062 INCHES MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABPA |
UNDERCUT DIAMETER |
0.963 INCHES MINIMUM AND 0.973 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0630 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 FREE AIR SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
0.25 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| AAVM |
PILOT LENGTH |
0.0570 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.041 INCHES MINIMUM AND 2.081 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TAB, SOLDER LUG |
| AEDA |
MOUNTING LIP DEPTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |