| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
310.0 NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.138 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 TURRET |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| ADAQ |
BODY LENGTH |
0.800 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AEGC |
SHAFT RADIAL PLAY |
0.0009 INCHES |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.5 FREE AIR SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
160.0 SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-1.00/+1.00 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
65.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.50 INCH-OUNCES |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.00200 INCHES |
| ABPM |
BODY DIAMETER |
1.750 INCHES MAXIMUM |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
0.875 INCHES NOMINAL |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-1.0/+1.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
23.447 KILOHMS SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL HOLE/SLOT MOUNTED |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
45.0 SINGLE SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |