| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.20/+0.20 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 FREE AIR ALL SECTIONS |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 OHMS C AND BETTER SELECT |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 OHMS C AND BETTER V.G. STEPPING |
| ABPA |
UNDERCUT DIAMETER |
1.030 INCHES MAXIMUM |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| ABXF |
SHAFT LENGTH |
0.375 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
340.0 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1245 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
4 |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 2ND SECTION |
| ABPM |
BODY DIAMETER |
1.125 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
100.0 ALL SECTIONS |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAVL |
PILOT DIAMETER |
0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2500.0 1ST SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AECZ |
MOUNTING LIP DIAMETER |
1.0330 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
14 TURRET |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
500.0 2ND SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS 1ST SECTION |
| ADAQ |
BODY LENGTH |
2.060 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0450 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS 2ND SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |