| ADAP |
MOUNTING BUSHING LENGTH |
0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
C SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-94 SPECIFICATION |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-3.0/+0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0/+10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0/+3.0 120 DEG CELSIUS SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEFP |
NONTURN DEVICE RADIUS |
0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABPM |
BODY DIAMETER |
1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
309.0 MINIMUM AND 320.0 MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-94/5 GOVERNMENT SPECIFICATION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
309.0 MINIMUM AND 320.0 MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |