| CSDL |
STANDARD TAPER CURVE PER SECTION |
C 2ND SECTION |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
1800.0 1ST SECTION |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 SOLDER STUD |
| AAPN |
SECTION QUANTITY |
2 |
| AJYN |
SCREW THREAD DIAMETER |
0.164 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
1.8750 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABPC |
UNDERCUT WIDTH |
0.0930 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
4.156 INCHES NOMINAL |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A 1ST SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR ALL SECTIONS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 ALL SECTIONS |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION 1ST SECTION |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
1.250 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| ABPA |
UNDERCUT DIAMETER |
1.875 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.626 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
45.0 |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |