| ABPA |
UNDERCUT DIAMETER |
1.312 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
DOUBLE ENDED SHAFT |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.10 INCH-OUNCES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.25/+0.25 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| AEGC |
SHAFT RADIAL PLAY |
0.004 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
1.3125 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 SOLDER STUD |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| ADAQ |
BODY LENGTH |
0.992 INCHES NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
354.0 NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
1.4375 INCHES NOMINAL |
| ABPM |
BODY DIAMETER |
1.438 INCHES NOMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEGA |
LATERAL RUNOUT |
0.004 INCHES |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |