| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| AAVL |
PILOT DIAMETER |
1.5520 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
2.750 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
9.0 2ND SECTION AND 268.0 1ST SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS ALL SECTIONS |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS TERMINAL BASE LINEARITY |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.5 FREE AIR ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
4 |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
9.0 4TH SECTION AND 268.0 4TH SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.0015 INCHES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00100 INCHES |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-1.00/+1.00 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| AEFZ |
SHAFT RUNOUT |
0.0005 INCHES |
| ABPM |
BODY DIAMETER |
1.780 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AEFK |
MAXIMUM STARTING TORQUE |
1.60 INCH-OUNCES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
80.0 ALL SECTIONS |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
354.0 NOMINAL |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES MINIMUM |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
277.0 1ST SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| ABPA |
UNDERCUT DIAMETER |
1.562 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
2 2ND SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
2 4TH SECTION |
| AEGA |
LATERAL RUNOUT |
0.0025 INCHES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AECZ |
MOUNTING LIP DIAMETER |
1.7800 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
17 TURRET |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.80 INCH-OUNCES |