| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS ALL SECTIONS |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| AAPN |
SECTION QUANTITY |
2 |
| ADAQ |
BODY LENGTH |
2.427 INCHES NOMINAL |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
1.125 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.25/+0.25 ALL SECTIONS |
| AJYN |
SCREW THREAD DIAMETER |
0.164 INCHES NOMINAL |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AAVL |
PILOT DIAMETER |
1.8750 INCHES NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| TEST |
TEST DATA DOCUMENT |
10001-1713692 DRAWING |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AECZ |
MOUNTING LIP DIAMETER |
2.0000 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.40 INCH-OUNCES |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS EQUATION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1080.0 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0930 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 TAB, SOLDER LUG |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR ALL SECTIONS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 ALL SECTIONS |
| ABPA |
UNDERCUT DIAMETER |
1.813 INCHES NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ABWV |
SHAFT DIAMETER |
0.2497 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1260.0 NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
540.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
30.0 |
| AEFK |
MAXIMUM STARTING TORQUE |
2.00 INCH-OUNCES |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABPM |
BODY DIAMETER |
2.000 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |