| TEST |
TEST DATA DOCUMENT |
81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAPN |
SECTION QUANTITY |
1 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 305.0 MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| ABHP |
OVERALL LENGTH |
0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| ABPM |
BODY DIAMETER |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-94/2 GOVERNMENT SPECIFICATION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ABXF |
SHAFT LENGTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AEFM |
MAXIMUM STOP TORQUE |
80.00 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAV |
OVERALL DIAMETER |
0.953 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
250.0 KILOHMS SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 FREE AIR SINGLE SECTION |
| ADAP |
MOUNTING BUSHING LENGTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
LOCKING BUSHING |