| AEDA |
MOUNTING LIP DEPTH |
0.0730 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| AEFK |
MAXIMUM STARTING TORQUE |
2.20 INCH-OUNCES |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
172.5 ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
2.825 INCHES MAXIMUM |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS ALL SECTIONS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.30 INCH-OUNCES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
345.0 NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAVL |
PILOT DIAMETER |
2.8740 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0930 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
345.0 NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
3.0000 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
5.0 FREE AIR ALL SECTIONS |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 ALL SECTIONS |
| ADAQ |
BODY LENGTH |
1.620 INCHES MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS ABSOLUTE LINEARITY |
| ABPM |
BODY DIAMETER |
2.875 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
2 ALL SECTIONS |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |