| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.000 KILOHMS SINGLE SECTION |
| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| ABPA |
UNDERCUT DIAMETER |
1.422 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
352.0 NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| AECZ |
MOUNTING LIP DIAMETER |
1.4530 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.40 INCH-OUNCES |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.718 INCHES NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00150 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| ABNC |
FLAT HEIGHT |
0.187 INCHES NOMINAL |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGC |
SHAFT RADIAL PLAY |
0.004 INCHES |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AAVL |
PILOT DIAMETER |
1.3125 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| ADAQ |
BODY LENGTH |
0.992 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
0.60 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
500.0 SINGLE SECTION |
| ABPM |
BODY DIAMETER |
1.438 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 SOLDER STUD |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AEGA |
LATERAL RUNOUT |
0.004 INCHES |
| ABNB |
FIRST FLAT LENGTH |
0.312 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0/+1.0 OHMS SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |