| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.700 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE TWO ROWS |
| ADAU |
BODY HEIGHT |
0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
1.000 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
7.50 INCH-OUNCES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.086 NOMINAL MILS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.300 NOMINAL INCHES |
| AEFK |
MAXIMUM STARTING TORQUE |
7.50 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.063 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 7TH SECONDARY QUALITY |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AXGY |
MOUNTING METHOD |
TERMINAL AND UNTHREADED HOLE |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ADAQ |
BODY LENGTH |
1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0/+100.0 SINGLE SECTION |
| AYQR |
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS |
0.100 INCHES NOMINAL |