| AEFK |
MAXIMUM STARTING TORQUE |
0.70 INCH-OUNCES |
| ABPM |
BODY DIAMETER |
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.00500 INCHES |
| ABHP |
OVERALL LENGTH |
1.321 INCHES MINIMUM AND 1.403 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ADAV |
OVERALL DIAMETER |
1.937 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| ABPC |
UNDERCUT WIDTH |
0.0680 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.40 INCH-OUNCES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.5 FREE AIR SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
25.0 KILOHMS SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00200 INCHES |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
105.0 SINGLE SECTION |
| AECZ |
MOUNTING LIP DIAMETER |
1.7450 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
QUALITY CONT FOR POLARIS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 SOLDER STUD |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
354.0 NOMINAL |
| AAVL |
PILOT DIAMETER |
1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| ABXF |
SHAFT LENGTH |
0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
1.562 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.30/+0.30 SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |