| AAVL |
PILOT DIAMETER |
0.62400 INCHES MINIMUM AND 0.62500 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-2.0/+2.0 DEG ANGULAR ROTATION 1ST SECTION |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 MINIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.06200 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 SINGLE SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
3 SINGLE SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| AKPV |
MOUNTING FACILITY QUANTITY |
3 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| TEST |
TEST DATA DOCUMENT |
24930-123081 DRAWING |
| AEDA |
MOUNTING LIP DEPTH |
0.06200 INCHES NOMINAL |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-10.0/+10.0 DEG ANGULAR ROTATION 3RD SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 SOLDER STUD |
| ABPC |
UNDERCUT WIDTH |
0.05700 INCHES MINIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AECZ |
MOUNTING LIP DIAMETER |
0.87500 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFK |
MAXIMUM STARTING TORQUE |
0.60 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| AEFM |
MAXIMUM STOP TORQUE |
128.00 INCH-OUNCES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 FREE AIR SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.05/+0.05 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
2.156 INCHES MINIMUM AND 2.236 INCHES MAXIMUM |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
1.0 |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| ABXF |
SHAFT LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 MINIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
15.000 KILOHMS SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-10.0/+20.0 DEG ANGULAR ROTATION 2ND SECTION |
| ABPA |
UNDERCUT DIAMETER |
0.750 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.562 INCHES MINIMUM AND 1.580 INCHES MAXIMUM |