| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
25000.0 1ST SECTION |
| CSDK |
SWITCH CURRENT TYPE AND RATING IN AMPS |
0.001 DC AND 0.500 DC AND 0.010 DC |
| AEEA |
SWITCH TYPE |
ROTARY |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
80.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AEFL |
MAXIMUM RUNNING TORQUE |
4.00 INCH-OUNCES |
| ABUF |
ANGLE OF MOUNTING HOLE IN DEG |
90.0 |
| AJYN |
SCREW THREAD DIAMETER |
0.138 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
2.002 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
40000.0 2ND SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
80.000 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 1ST SECTION |
| ABVJ |
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG |
120.0 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
40000.0 3RD SECTION |
| ABPM |
BODY DIAMETER |
1.755 INCHES MAXIMUM |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS TERMINAL BASE LINEARITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
26 TAB, SOLDER LUG |
| AEGH |
SWITCH OPERATING POSITION |
START OF LINEAR MOVEMENT |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 2ND SECTION |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
175.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
5 |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 3RD SECTION |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 4TH SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
6.50 INCH-OUNCES |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 5TH SECTION |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2000.0 4TH SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEED |
SWITCH VOLTAGE RATING IN VOLTS |
35.0 AND 250.0 AND 250.0 |
| AECZ |
MOUNTING LIP DIAMETER |
2.0620 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEDE |
MOUNTING HOLE/STUD CIRCLE DIAMETER |
0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
5.344 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR ALL SECTIONS |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
350.0 NOMINAL |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2000.0 5TH SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 ALL SECTIONS |
| FEAT |
SPECIAL FEATURES |
3 SWITCH SECTIONS |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEDA |
MOUNTING LIP DEPTH |
0.0930 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| AXGY |
MOUNTING METHOD |
THREADED HOLE |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AKPV |
MOUNTING FACILITY QUANTITY |
4 |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AEGJ |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AAVL |
PILOT DIAMETER |
0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
4.000 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING |
| ABPA |
UNDERCUT DIAMETER |
1.750 INCHES NOMINAL |
| AAVM |
PILOT LENGTH |
0.1250 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0730 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.30/+0.30 ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
4.000 PERCENT, RATED AMPERES C DROP SIDING |
| ADAQ |
BODY LENGTH |
4.219 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
SWITCH |