| AEFP |
NONTURN DEVICE RADIUS |
0.433 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| ABPM |
BODY DIAMETER |
0.875 INCHES NOMINAL |
| AEFY |
SHAFT END PLAY |
0.00504 INCHES |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ABHP |
OVERALL LENGTH |
2.068 INCHES NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.500 KILOHMS ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 ALL SECTIONS |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEGC |
SHAFT RADIAL PLAY |
0.002 INCHES |
| ABXF |
SHAFT LENGTH |
0.812 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1080.0 NOMINAL |
| AEGB |
PILOT DIAMETER RUNOUT |
0.00150 INCHES |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1080.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR ALL SECTIONS |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.60 INCH-OUNCES |
| ADAQ |
BODY LENGTH |
1.256 INCHES NOMINAL |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFK |
MAXIMUM STARTING TORQUE |
0.60 INCH-OUNCES |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFZ |
SHAFT RUNOUT |
0.002 INCHES |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.062 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.30/+0.30 ALL SECTIONS |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
ALL SECTIONS INDEPENDENT LINEARITY |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |