| ABXF |
SHAFT LENGTH |
0.562 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ABPM |
BODY DIAMETER |
0.870 INCHES NOMINAL |
| ADAV |
OVERALL DIAMETER |
1.200 INCHES NOMINAL |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AAVM |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| CQCH |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION |
1800.0 SINGLE SECTION |
| AEDZ |
SHAFT BEARING TYPE |
BALL |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| AECZ |
MOUNTING LIP DIAMETER |
0.8700 INCHES NOMINAL |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 KILOHMS SINGLE SECTION |
| AAVL |
PILOT DIAMETER |
0.6250 INCHES NOMINAL |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3700.0 NOMINAL |
| AEDA |
MOUNTING LIP DEPTH |
0.0620 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.50 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
1.50 INCH-OUNCES |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| ABHP |
OVERALL LENGTH |
2.362 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.800 INCHES MAXIMUM |
| AEFM |
MAXIMUM STOP TORQUE |
80.00 INCH-OUNCES |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 FREE AIR SINGLE SECTION |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-400.0/+400.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CSBW |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS |
2500.0 SINGLE SECTION |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.05/+0.05 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 SOLDER STUD |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ABPA |
UNDERCUT DIAMETER |
0.750 INCHES NOMINAL |