| AEGH |
SWITCH OPERATING POSITION |
ANY POSITION OF ROTATION TRAVEL |
| AEEA |
SWITCH TYPE |
PULL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.0 7TH SECONDARY FINISH AND 2.0 7TH SECONDARY PATTERN |
| AEDX |
SHAFT STYLE |
ROUND |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-3.0/+0.0 -55 DEG CELSIUS ALL SECTIONS AND -5.0/+10.0 25 DEG CELSIUS ALL SECTIONS AND -5.0/+10.0 -25 DEG CELSIUS ALL SECTIONS AND +0.0/+3.0 120 DEG CELSIUS ALL SECTIONS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
1.0 PERCENT, RATED AMPERES C AND BETTER FINISH AND 100.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AAPN |
SECTION QUANTITY |
2 |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| AAQL |
BODY STYLE |
RECTANGULAR W/BUSHING |
| ABMK |
OVERALL WIDTH |
1.234 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.750 INCHES MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| ADAQ |
BODY LENGTH |
1.406 INCHES MAXIMUM |
| CSDK |
SWITCH CURRENT TYPE AND RATING IN AMPS |
3.000 AC/DC |
| CBBL |
FEATURES PROVIDED |
SHAFT SEAL AND SWITCH |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 TAB, SOLDER LUG |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 ALL SECTIONS |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
312.0 NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
312.0 NOMINAL |
| AEED |
SWITCH VOLTAGE RATING IN VOLTS |
117.0 |
| ADAT |
BODY WIDTH |
1.234 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.750 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.156 INCHES MAXIMUM |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| APXH |
TERMINAL LOCATION |
REAR-BOTTOM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AEGJ |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ADAU |
BODY HEIGHT |
1.438 INCHES MAXIMUM |
| ADAP |
MOUNTING BUSHING LENGTH |
0.375 INCHES NOMINAL |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
C 1ST SECTION AND A 2ND SECTION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |