| ABKW |
OVERALL HEIGHT |
0.280 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 FREE AIR SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
81349-MILR27208-3 SPECIFICATION |
| ABXF |
SHAFT LENGTH |
0.036 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
20.000 OHMS SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.280 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 WIRE LEAD |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CCW |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.254 INCHES MINIMUM AND 1.346 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |