| AAVM |
PILOT LENGTH |
0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
5.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| ABPA |
UNDERCUT DIAMETER |
0.624 INCHES NOMINAL |
| AEFM |
MAXIMUM STOP TORQUE |
160.00 INCH-OUNCES |
| AECZ |
MOUNTING LIP DIAMETER |
0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
2 |
| AEGC |
SHAFT RADIAL PLAY |
0.001 INCHES |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
50.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0/+3.0 ALL SECTIONS |
| ABWV |
SHAFT DIAMETER |
0.624 INCHES NOMINAL |
| AEFL |
MAXIMUM RUNNING TORQUE |
1.20 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
2ND SECTION TERMINAL BASE LINEARITY |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 2ND SECTION |
| AEGB |
PILOT DIAMETER RUNOUT |
0.001 INCHES |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.9 FREE AIR ALL SECTIONS AND 0.5 FREE AIR ALL SECTIONS |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 ALL SECTIONS |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
125.0 ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABPC |
UNDERCUT WIDTH |
0.0570 INCHES MINIMUM |
| ABXF |
SHAFT LENGTH |
0.358 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
ALL SECTIONS LINEAR |
| AEFK |
MAXIMUM STARTING TORQUE |
1.40 INCH-OUNCES |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
1800.0 NOMINAL |
| ABHP |
OVERALL LENGTH |
2.702 INCHES MINIMUM AND 2.791 INCHES MAXIMUM |
| AEFZ |
SHAFT RUNOUT |
0.001 INCHES |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 ALL SECTIONS |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.10/+0.10 1ST SECTION |
| AAVL |
PILOT DIAMETER |
0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| AEGA |
LATERAL RUNOUT |
0.002 INCHES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
1ST SECTION ZERO BASED LINEARITY |
| ADAV |
OVERALL DIAMETER |
1.085 INCHES NOMINAL |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.20/+0.20 2ND SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| ADAQ |
BODY LENGTH |
2.292 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| AEDA |
MOUNTING LIP DEPTH |
0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SOLDER STUD |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-5.0/+5.0 OHMS ALL SECTIONS |
| ABPM |
BODY DIAMETER |
0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| AEFY |
SHAFT END PLAY |
0.005 INCHES |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
1800.0 NOMINAL |