| ABPA |
UNDERCUT DIAMETER |
1.625 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
145.0 SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
2.489 INCHES NOMINAL |
| AAPN |
SECTION QUANTITY |
1 |
| AEDX |
SHAFT STYLE |
ROUND |
| ABPC |
UNDERCUT WIDTH |
0.07300 INCHES MINIMUM AND 0.08300 INCHES MAXIMUM |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50/+0.50 SINGLE SECTION |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
340.0 NOMINAL |
| ADAV |
OVERALL DIAMETER |
2.031 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
BEARING |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABXF |
SHAFT LENGTH |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AEFK |
MAXIMUM STARTING TORQUE |
0.50 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION INDEPENDENT LINEARITY |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 FREE AIR SINGLE SECTION |
| AEDA |
MOUNTING LIP DEPTH |
0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
1.489 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
1.750 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
1.56100 INCHES MINIMUM AND 1.56200 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
CLAMP RING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CONTINUOUS MOTION |
| AECZ |
MOUNTING LIP DIAMETER |
1.74500 INCHES MINIMUM AND 1.75500 INCHES MAXIMUM |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-1.0/+1.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
360.0 NOMINAL |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AAQL |
BODY STYLE |
CYLINDRICAL SERVO MOUNTED |
| AAVM |
PILOT LENGTH |
0.08800 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SOLDER STUD |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |