| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.000 OHMS C AND BETTER FINISH |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-70.0/+70.0 ALL SECTIONS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.500 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
0.920 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
2 |
| ADAP |
MOUNTING BUSHING LENGTH |
0.380 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 7TH SECONDARY FINISH |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 ALL SECTIONS |
| ADAQ |
BODY LENGTH |
1.085 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
1.5 7TH SECONDARY PATTERN |
| AEFP |
NONTURN DEVICE RADIUS |
0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING W/SHAFT SEAL |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
320.0 NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 ALL SECTIONS |
| ABNC |
FLAT HEIGHT |
0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
1.062 INCHES NOMINAL |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A ALL SECTIONS |
| ABNB |
FIRST FLAT LENGTH |
0.260 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SOLDER STUD |
| ABHP |
OVERALL LENGTH |
2.495 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |