| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
11520.0 MINIMUM AND 13680.0 MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
1 |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| FEAT |
SPECIAL FEATURES |
TERMINAL PIN 0.030 IN. DIA PORM 0.005 IN,TERMINALS GOLD PLATED |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.000 OHMS SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0/+50.0 SINGLE SECTION |
| AEFD |
ACTUATOR TYPE |
FLUSH DRIVE WITH SLOT-HOLE |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.200 INCHES NOMINAL |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
CLUTCH |
| ADAQ |
BODY LENGTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| APXH |
TERMINAL LOCATION |
REAR END |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0/+5.0 SINGLE SECTION |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| ABKW |
OVERALL HEIGHT |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
11520.0 MINIMUM AND 13680.0 MAXIMUM |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE |