| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
+0.0/+2.5 0 DEG CELSIUS 2ND SECTION AND +0.0/+7.0 -55 DEG CELSIUS 1ST SECTION AND +0.0/+5.5 120 DEG CELSIUS 1ST SECTION AND +0.0/+2.0 0 DEG CELSIUS 1ST SECTION AND +0.0/+3.5 -25 DEG CELSIUS 1ST SECTION AND +0.0/+8.5 150 DEG CELSIUS 1ST SECTION AND +0.0/+7.5 120 DEG CELSIUS 2ND SECTION AND -3.5/+3.5 85 DEG CELSIUS 2ND SECTION AND -2.5/+2.5 85 DEG CELSIUS 1ST SECTION AND +0.0/+5.0 -25 DEG CELSIUS 2ND SECTION AND +0.0/+10.0 -55 DEG CELSIUS 2ND SECTION AND +0.0/+12.5 150 DEG CELSIUS 2ND SECTION |
| AGQL |
UNDERCUT LENGTH |
0.430 NOMINAL INCHES |
| AEDX |
SHAFT STYLE |
ROUND, STEPPED |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 PERCENT, RATED AMPERES C AND BETTER FINISH AND 2.5 GALLONS PER MINUTE C AND BETTER INDUSTRIAL CLEARS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 ALL SECTIONS |
| AAPN |
SECTION QUANTITY |
2 |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-20.0/+20.0 ALL SECTIONS |
| ABXF |
SHAFT LENGTH |
1.310 INCHES NOMINAL |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
3.0 7TH SECONDARY AT 10'30 OCLOCK |
| AEFL |
MAXIMUM RUNNING TORQUE |
8.00 INCH-OUNCES |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| AEFD |
ACTUATOR TYPE |
DUAL CONCENTRIC |
| ADAP |
MOUNTING BUSHING LENGTH |
0.250 INCHES NOMINAL |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFM |
MAXIMUM STOP TORQUE |
192.00 INCH-OUNCES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABPM |
BODY DIAMETER |
1.160 NOMINAL CENTIMETERS |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
312.0 NOMINAL |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
312.0 NOMINAL |
| ADAQ |
BODY LENGTH |
0.432 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFK |
MAXIMUM STARTING TORQUE |
8.00 INCH-OUNCES |
| TEST |
TEST DATA DOCUMENT |
97942-576R030 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A 1ST SECTION AND F 2ND SECTION |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 ALL SECTIONS |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| FEAT |
SPECIAL FEATURES |
INNER SHAFT FLATTED 0.280 IN. LENGTH BY 0.080 IN. HEIGHT |
| AEDQ |
UNDERCUT DIAMETER |
0.125 NOMINAL INCHES |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |